So the main issue is that when u have 2 action bars anchored to the right of your UI and open ur bags, the bags graphic displays over the 2 bars on the right. Problem that occurs is that if u click on an item (like a piece of gear or consumable) to try to move it in a different bag slot, the 2 right action bars pop over the bags graphics and makes a mess.
Solution for me would be to have bags open anchored to the edge of ur right action bars so they dont over lap. Or alow us to move the place bags open up in edit mode. Its the first time i had to install Bagnone so i could move the bags to the side.
Any chance this gets any attention? I understand its not game breaking but before the prepatch this wasnt an issue. Its a shame to have minor details leave a bad taste in what else would be a huge step in the right direction.
Yes please, tell me what the sollution is… it’s horrible.
If you have your disencanting button on that right bar you can’t disencant anymore.
Never had an issue with it… untill now. So horrible…
I have the same problem - it’s a real hassle - close the bags (with B,) click on the disenchant button, open the bags (again with B,) disenchant the item, close the bags, click on the disenchant button…rinse and repeat
I had this problem and the way to fix it that worked for me is this:
Open Edit Mode
Select one of the vertical bars on the right
Click “Reset to Default Position” - this will be highlighted if your bar isn’t in the original position.
Repeat this for the other bar, if you have the two bars attached.
Check that bar 4 is the one nearest the edge of the screen with bar 5 to the left of that. I discovered that somehow these bars had swapped places and when I swapped them, then clicked “Reset to Default Position” it fixed the bags covering the bars problem.